Portable battery-powered instruments

Digital gain and offset adjustment

Programmable voltage and current sources

Programmable attenuators

Industrial process controls




The CBM53D04/CBM53D14/CBM53D24 are quad 8-, 10- and 12-bit buffered voltage output DACs in MSOP10L packages that operate from a single 2.5V to 5.5V supply, consuming only 500uA at 3V. They have onchip rail-to-rail output amplifiers with slew rate of 0.7V/us. A 3-wire serial interface compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards is used, which can operates at clock rates up to 30MHz.

The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneous. It incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0V and remains there until a valid write takes place to the device. The parts contain a powerdown feature that reduces the current consumption to 200nA @ 5V (80nA @ 3V).


  • CBM53D04: 4 buffered 8-Bit DACs in MSOP10L

  • CBM53D14: 4 buffered 10-Bit DACs in MSOP10L

  • CBM53D24: 4 buffered 12-Bit DACs in MSOP10L

  • Low power operation: 500uA @ 3V, 600uA @ 5V

  • 2.5V to 5.5V power supply

  • Power-down to 80nA @ 3V,200nA @ 5V

  • Double-buffered input logic

  • Output range:0V to VREF

  • Power-on reset to 0V

  • On-chip, rail-to-rail output buffer amplifiers

  • Temperature range -40℃ to +105℃


CBM53D24AQFQFN-1010-40℃至+ 105℃Reel, 1000RoHS在线申请


  • 文件名称 文件描述 文件大小 时间 下载
  • CBM53D24 四通道、电压输出12位DAC 1.06M 2019-08-20