The CBMG706 and CBMG707 are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The CBMG706 switches one of 16 inputs(S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The CBMG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2.An EN input on both
devices is used to enable or disable the device. When disabled, all channels are switched OFF. Low-power consumption and operating supply range of 1.8V to 5.5V make the CBMG706 and CBMG707 ideal for battery-powered,portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5V. These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed,very low ON resistance, and leakage currents. ON
resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.The CBMG706 and CBMG707 are available in small 28-lead TSSOP packages.
Supply(max) (V):5.5
Dual power supply voltage (typ) (V): ± 2.5
1.8V to 5.5V single supply
±2.5V dual supply
2.5Ω on resistance
0.5Ω on resistance flatness
100 pA leakage currents
40 ns switching times
Single 16-to-1 multiplexer CBMG706
Differential 8-to-1 multiplexer CBMG707
28-lead TSSOP package
Low power consumption
TTL-/CMOS-compatible inputs
Data acquisition systems
Communication systems
Relay replacement
Audio and video switching
Battery-powered systems
Type | Title | File Size | Date | Download |
Selection Guide | Corebai Selection Guide Rev.En2023.pdf | 7.73M | 2024-01-24 | Download |
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
010-62106066
( Monday to Friday 9:00 - 18:00 )
704-705, Block D, Building 2, No. 9 Fenghao East Road, Haidian District, Beijing
Wechat Public Account