CBMG738 CMOS、低压、单电源8:1多路复用器，串行控制矩阵开关

CBMG738 is an 8-channel, 3-wire serial interface controlled CMOS analog matrix switch/multiplexer. The conduction resistance between switches is strictly matched and has very good flatness throughout the entire signal range.

CBMG738 adopts a three wire serial interface and is compatible with SPI ™、 QSPI ™、 MICROWIRE ® Compatible with some DSP interface standards. By using the output of the input shift register DOUT, several such devices can be connected in a daisy chain form. When powered on, the internal input shift register is all zero, and all switches are in the off state.

When turned on, the conductivity of each switch is the same in both directions, making this device suitable for both multiplexing and demultiplexing applications. Each switch is connected or disconnected through a separate position, so this device can also be configured in the form of a switch matrix, where any or all of the eight switches can be closed or disconnected at any time. The input signal range can be extended to the power supply voltage range.

All channels adopt a first open and then close switch to prevent instantaneous short circuits when switching channels.

Parameters
Features
Applications

Channel Configuration:（8 : 1）×1
Supply(min) (V):2.7
Supply(max) (V):5.5
On ResistanceRon(typ)(Ohms):2.5
Flatness of on resistance(typ)(Ohms):0.75
Leakage switch(typ)(pA):10
Channel Isolation(dB):-75
GAIN BANDWIDTH PRODUCT(typ)(MHz):65
Interface:SPI

Dual line serial interface
Single power supply: 2.7 V to 5.5 V
On resistance: 2.5 Ω (typical value)
Low on resistance flatness: 0.75 Ω (typical value)
Leakage current: 100 pA
Dual 4:1 matrix switch
Power on reset
TTL/CMOS compatible

Data collection system
communication system
Alternative relay solutions
Audio and video switches
Automatic Test Equipment (ATE)

Type	Title	File Size	Date	Download
Selection Guide	Corebai Selection Guide Rev.En2023.pdf	7.73M	2024-01-24	Download

计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

下载
计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

下载

Terms and Conditions

1. Scope of application

a) After you use this application web service, you will be able to get your network data to help you choose the reliable carrier.

2. Information use

a) This application does not provide, sell, rent, share or trade your personal information to any unrelated third party, unless you have obtained your permission in advance, or the third party and this application (including the affiliates of this application) are either individually or jointly You provide the service, and after the service is over, it will be blocked from accessing all of this material that it has previously been able to access.

b) This application also does not allow any third party to collect, edit, sell or distribute your personal information by any means. Any user of this application platform who engages in the above activities, once found, the application has the right to immediately terminate the service agreement with the user.

c) For the purpose of serving the User, the App may use the information you use to provide you with information of interest to you, including but not limited to, to send you product and service information, or to share information with the App Partner so that they may You send information about its products and services (the latter requires your prior consent).

3. Information disclosure

In the following circumstances, this application will disclose your personal information in whole or in part according to your personal wishes or the law:

a) disclose to third parties with your prior consent;

b) in order to provide the products and services you request, you must share your personal information with third parties;

c) disclosure to third parties or administrative or judicial authorities in accordance with the relevant provisions of the law, or at the request of the administrative or judicial authorities;

d) If you have violated relevant Chinese laws, regulations or this application service agreement or related rules, you need to disclose it to third parties;

e) If you are a qualified IP Complainant and have filed a complaint, it should be disclosed to the Respondent at the request of the Complainant so that both parties can handle possible rights disputes;

f) Other disclosures that this application considers appropriate in accordance with laws, regulations or website policies.

4. Information security

a) We will not submit or upload your information, so your information is absolutely safe

Product number	Rating	Inventory(pcs)	Price	Package	MSL	RoHS	MPQ	Operating Temperature Range (℃)	Order
CBMG738ATS16	Industrial grade	0	$ 0.00 	TSSOP-16	MSL 3	RoHS	Tape and Reel, 2500	-40 to 85	- + Requested quantity exceeds in stock amount Add to cart