CBM9002A-100TIG
Active
USB 2.0 peripheral controller with 16K RAM, 40 GPIOs, and serial debugging
CBM9002A.pdf | 2.25M
The CBM9002A series is a USB microcontroller based on an enhanced 8051 core that meets industry standards. Supports two modes: high-speed 480Mbps and full speed 12Mbps using the USB2.0 protocol.
The enhanced 8051 can operate at frequencies of 48, 24, and 12MHz; Each instruction cycle has 4 clocks, which is three times the speed of the standard 8051. The CBM9002A series has a built-in on-chip SRAM space of up to 16K bytes, which can be used to store user code or data.
The CBM9002A series provides commonly used low-speed communication interfaces such as USART, I2C, GPIO, etc., in addition to USB interfaces, for communication with other peripherals.
The CBM9002A series supports powerful data transmission functions such as SlaveFIFO and PIF (Programmable Interface); Based on the CBM9002A series firmware framework provided by CBM, it can achieve data transmission capabilities of over 50MB/s, with a maximum bandwidth of USB2.0.
  • Parameters
  • Features
  • Applications
  • Voltage (V):3
  • Power supply (V):3.6
  • Core processor:8051
  • Program storage type:ROMless
  • Memory size:16K x 8
  • Interface:I ² C. USB, USART
  • Input/output quantity:40
  • Enhanced 8051 kernel compatible with industry standards

  • Power on reset (POR), external RESET input

  • Supports suspend mode, with a minimum power consumption of 1mA

  • Supports standard USB2.0 protocol

  • Up to 5 groups with a total of 40 bidirectional IOs (only supported for 100pin)

  • Supports 3 16 bit counters/timers

  • Sensor applications

  • Portable video devices

  • Data acquisition system

  • Memory, card reader

  • Laser engraving equipment

  • VGA video capture and transmission equipment, etc

  • Industrial cameras or video surveillance equipment

  • ATA interface, such as IDE hard drive

  • Scanner

  • Portable sound card or MP3 playback device

Type Title File Size Date Download
Selection Guide Corebai Selection Guide Rev.En2023.pdf 7.73M 2024-01-24 Download
  • 计算工具

    ANALOG-ENGINEER-CALC — 模拟工程师计算器

    模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

  • 计算工具

    ANALOG-ENGINEER-CALC — 模拟工程师计算器

    模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

Ordering & Quality
Product number Rating Inventory(pcs) Price Package MSL RoHS MPQ Operating Temperature Range (℃) Order
CBM9002A-100TIG Industrial grade 62000
100~719$3.86
720~1439$3.25
1440+$3.01
TQFP-100 MSL 3 RoHS Tray, 720 -40 to 105
-
+

Add to cart

X
Added to cart!

010-62106066

( Monday to Friday 9:00 - 18:00 )

704-705, Block D, Building 2, No. 9 Fenghao East Road, Haidian District, Beijing

sales@corebai.com

Wechat Public Account

© Copyright 芯佰微电子(北京)有限公司 京ICP备15051729号