CBMG729 is a CMOS, dual 4-channel analog matrix switch with a serial controlled dual wire interface. The conduction resistance matching between switches is strict, and the conduction resistance curve is very flat throughout the entire signal range. This device is equally excellent whether used as a multiplexer, demultiplexer, or switch array; The input signal range can be extended to the power supply voltage range.
CBMG728 and CBMG729 are compatible with I2C ™ The interface standard is compatible with a dual wire serial interface, both equipped with two external address pins (A0 and A1), allowing users to set 2 LSB for 7-bit slave addresses. Four of these two devices can be connected on the same bus. CBMG728 also includes a RESET pin, which should be connected to a high level when not in use.
Each channel is controlled by one bit of an 8-bit word. This means that these devices can be configured in various ways, with all channels or any channel being connected at any time, or no channel being connected.
When the device is powered on, all switches are in the off state, and the internal shift register is all zero.
All channels adopt a first open and then close switch to prevent instantaneous short circuits when switching channels.
Supply(max) (V):5.5
Single power supply: 2.7 V to 5.5 V
Dual line serial interface
Conduction resistance: 2.5 Ω (typical value)
Low conductivity resistance flatness: 0.75 Ω (typical value)
Leakage current: 100 pA
Single 8:1 matrix switch
Power on reset
Data collection system
communication system
Alternative relay solutions
Audio and video switches
Automatic Test Equipment (ATE)
Type | Title | File Size | Date | Download |
Selection Guide | Corebai Selection Guide Rev.En2023.pdf | 7.73M | 2024-01-24 | Download |
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
Product number | Rating | Inventory(pcs) | Price | Package | MSL | RoHS | MPQ | Operating Temperature Range (℃) | Order |
CBMG729ATS16 | Industrial grade | 0 |
1~5 | $ 0.42
|
TSSOP-16 | MSL 3 | RoHS | Tape and Reel, 2500 | -40 to 85 |
010-62106066
( Monday to Friday 9:00 - 18:00 )
704-705, Block D, Building 2, No. 9 Fenghao East Road, Haidian District, Beijing
Wechat Public Account