The CBM8601, CBM8602, and CBM8604 are single, dual, and quad rail-to-rail, input and output, single-supply amplifiers featuring very low offset voltage and Gain bandwidth productcharacteristics up to 8.5MHz. These amplifiers use a new, patented trimming technique that achieves superior performance without laser trimming. All are fully specified to operate on a 2.7V to 5.5 V single supply.
The combination of low offsets, very low input bias currents, and high speed make these amplifiers useful in a wide variety of applications. Filters, integrators, diode amplifiers, shunt current sensors, and high impedance sensors all benefit from the combination of performance features. Audio and other ac applications benefit from the wide bandwidth and low distortion. Applications for these amplifiers include audio amplification for portable devices, portable phone headsets, bar code scanners, portable instruments, cellular PA controls, and multipole filters. The ability to swing rail-to-rail at both the input and output enables designers to buffer CMOS ADCs, DACs, ASICs, and other wide output swing devices in single-supply systems.
The CBM8601, CBM8602, and CBM8604 are specified over the extended industrial (−40°C to+125°C) temperature range. The CBM8601, single, is available in a tiny, 5-lead SOT-23 package. The CBM8602, dual, is available in 8-lead MSOP and 8-lead, narrow SOIC surface-mount packages. The CBM8604, quad, is available in 14-lead TSSOP, 14-lead SOIC, and 16-lead QSOP packages.
Low offset voltage: 80 μV (typ)
Low supply current: 750 μA/Amplifier
Single-supply operation: 2.7 V to 5.5 V
Wide bandwidth: 8.5 MHz
Slew rate: 5 V/μs
Unity gain stable
Low input currents
Barcode scanners
Multipole filters
Battery-powered instrumentation
Current sensing
Sensors
PA controls
Audio
Type | Title | File Size | Date | Download |
Product manual | CBM8601_CBM8602_CBM8604 | 2435KB | 2024-11-29 | Download |
Selection Guide | Corebai Selection Guide Rev.En2023.pdf | 7.73M | 2024-01-24 | Download |
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
计算工具
ANALOG-ENGINEER-CALC — 模拟工程师计算器
模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益 到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
010-62106066
( Monday to Friday 9:00 - 18:00 )
704-705, Block D, Building 2, No. 9 Fenghao East Road, Haidian District, Beijing
Wechat Public Account