CBMRF9002 Dual Narrow-Band and Wideband RF Transceive-Corebai Microelectronics (Beijing) Co., Ltd

The CBMRF9002 is a highly integrated RF transceiver offering dual transmitters and dual receivers, integrated synthesizers, and digital signal processing functions.

The CBMRF9002 is a high performance, high linear, high dynamic range transceiver, and is extremely suitable for low power, portable and battery powered equipment.

The CBMRF9002 operates from 10MHz to 7250MHz. The device is capable of both TDD and FDD operation.

The CBMRF9002 consists of direct conversion signal paths with ideal noise figure and linearity. Each complete receiver and transmitter subsystem includes dc offset correction, quadrature error correction (QEC), and programmable digital filters, which eliminate the need for these functions in the digital baseband. In addition, several auxiliary functions, such as auxiliary analog-to-digital converters (ADCs), auxiliary digital-to-analog converters (DACs), and general-purpose inputs/outputs (GPIOs), are integrated to provide additional monitoring and control capability.

The fully integrated phase-locked loops (PLLs) provide high performance, low power, fractional-N frequency synthesis for the transmitter, receiver, and clock sections. Careful design and layout techniques provide the isolation required in high performance personal radio applications.

All voltage controlled oscillator (VCO) and loop filter components are integrated to minimize the external component count. The local oscillators (LOs) have flexible configuration options and include fast lock modes.

The transceiver includes low power sleep and monitor modes to save power and extend the battery life of portable devices while monitoring communications.

CBMRF9002 supports multichip synchronization mechanism that synchronizes the phase of the RF local oscillator (LO) and digital clock.

The power supplies of CBMRF9002 include 1.0V, 1.3V and 1.8V. These voltages can be generated form linear regulators or switching regulators.

CBMRF9002 uses an SPI interface to communicate with the external processor.

High data rate and low data rate interfaces are supported using configurable CMOS or low voltage differential signaling (LVDS) serial synchronous interface (SSI) choice.

The CBMRF9002 is packaged in a 12 mm × 12 mm, 196-ball chip scale package ball grid array (CSP_BGA).

CBMRF9002 operates over extended industrial temperature range -40℃~+125℃.

Parameters
Features
Applications

Frequency Range: 10MHz-7.25GHz
Maximum receiver bandwidth(MHz): 100
Channel: 2T2R/2T3R
Datapath Interface: LVDS
PLL Configuration: 4
RFPLL fast frequency hopping: 3w hop/s
NCO fast frequency hopping: 10w hop/s
Channel Rate@One channel: 16bit, 125MSa/S
Channel Rate@Dual channel: 16bit, 62.5MSa/S
Fast Start(s): ≤0.5
Low-IF Operation: YES
Synchronization Error(des): ≤±5
Synchronization Time (ms): ≤10
Output Power(dBm)@Full bandwidth: 5
RF SNR(dBc): ≥60
Temperature Range(°C): -40 to 125

Dual transmitters
Dual receivers
Dual input observation receivers
Minimum signal bandwidth 12kHz
Maximum signal bandwidth 40MHz
Integrated fractional-N frequency synthesizers
Integrated clock synthesizer
Multichip phase synchronization
LVDS and CMOS synchronous serial data interface options
Frequency range (center frequency) 10 MHz to 7250 MHz
Each Rx/Tx can operate at different frequencies
Fast frequency hopping
Low power monitor and sleep modes

VHF, UHF and cellular communication
TDD and FDD applications
Phased array radar
Test equipment

Type

Title

File Size

Date

Download

计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

下载
计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。

下载

Terms and Conditions

1. Scope of application

a) After you use this application web service, you will be able to get your network data to help you choose the reliable carrier.

2. Information use

a) This application does not provide, sell, rent, share or trade your personal information to any unrelated third party, unless you have obtained your permission in advance, or the third party and this application (including the affiliates of this application) are either individually or jointly You provide the service, and after the service is over, it will be blocked from accessing all of this material that it has previously been able to access.

b) This application also does not allow any third party to collect, edit, sell or distribute your personal information by any means. Any user of this application platform who engages in the above activities, once found, the application has the right to immediately terminate the service agreement with the user.

c) For the purpose of serving the User, the App may use the information you use to provide you with information of interest to you, including but not limited to, to send you product and service information, or to share information with the App Partner so that they may You send information about its products and services (the latter requires your prior consent).

3. Information disclosure

In the following circumstances, this application will disclose your personal information in whole or in part according to your personal wishes or the law:

a) disclose to third parties with your prior consent;

b) in order to provide the products and services you request, you must share your personal information with third parties;

c) disclosure to third parties or administrative or judicial authorities in accordance with the relevant provisions of the law, or at the request of the administrative or judicial authorities;

d) If you have violated relevant Chinese laws, regulations or this application service agreement or related rules, you need to disclose it to third parties;

e) If you are a qualified IP Complainant and have filed a complaint, it should be disclosed to the Respondent at the request of the Complainant so that both parties can handle possible rights disputes;

f) Other disclosures that this application considers appropriate in accordance with laws, regulations or website policies.

4. Information security

a) We will not submit or upload your information, so your information is absolutely safe

Product number	Rating	Inventory(pcs)	Price	Package	MSL	RoHS	MPQ	Operating Temperature Range (℃)	Order
CBMRF9002	Industrial Grade	0	1~9 \| $ 0.00  10~49$0.00 50~99$0.00 100+$0.00	BGA-196	MSL 3	RoHS	--	-40 - 125	- + Requested quantity exceeds in stock amount Add to cart